CNC Lathe Machine

Product Details:

• Swing over bed (For Capacity): 340mm
• Maximum turning diameter (For Capacity): 200mm
• Motor Torque (For Ballscrew): 7Nm

Product Details:

• Swing over bed (For Capacity): 340mm
• Maximum turning diameter (For Capacity): 200mm
• Motor Torque (For Ballscrew): 7Nm

Product Details:

Product Details:

TCP H-300

Product Description:

• Total Length Of Bed (Travelling Space) 1676mm (914mm),
• Height Of Center 304.8 mm, Width Of Bed 381 mm Spindle Bore 52 mm, Swing Over Bed 508 mm,
• Swing Over Cross Slide 308.4 mm, Swing Over Telescopic Cover 409 mm, Distance Between Centers 400 mm,
• X – Travel 254 mm, Z – Travel 335 mm, X/Z Feeding Rate 6/8 m/min,
• Controller System Siemens/Fanuc/Mitsubishi , Machine Operating System Siemens/Fanuc/Mitsubishi,
• X – Drive AC Servo Motor 4 Nm, Z – Drive AC Servo Motor 7.7 Nm, Axis X & Z Harden Bed Ways & Turcite Turret Four Station / Tool Change,
• Spindle Drive V-Belt Pulley Drive,
• Coolant Water Cooled,
• Lubrication System Auto Lubrication Unit Chuck 250 mm Power Chuck,
• Electronics Hand Wheel Standard,
• Isolation Transformer For Both Drive, Spindle Speed 50-800 RPM,
• Spindle Taper MT-06, Repeatability 0.05 mm, Chuck Cylinder Open or Close Type,
• Hydraulic Power Pech Standard, Bed Type Plano Type,
• Main Motor 15 HP

Product Details:

TCP H-400

Product Description:

• Total Length Of Bed (Travelling Space) 2133mm (1371mm),
• Height Of Center 406.4 mm,
• Width Of Bed 457.2 mm ,
• Spindle Bore 80mm,
• Swing Over Bed 711.2 mm,
• Swing Over Cross Slide 457.2 mm,
• Swing Over Telescopic Cover 612 mm,
• Distance Between Centers 800 mm,
• X – Travel 325 mm, Z – Travel 838.2mm,
• X/Z Feeding Rate 6/8 m/min,
• Controller System Siemens/Fanuc/Mitsubishi, Machine Operating System Siemens/Fanuc/Mitsubishi,
• X – Drive AC Servo Motor 7.7 Nm,
• Z – Drive AC Servo Motor 7.7 Nm, Axis X & Z Harden Bed Ways & Turcite,
• Turret Four Station / Tool Change,
• Spindle Drive V-Belt Pulley Drive, Coolant Water Cooled,
• Lubrication System Auto Lubrication Unit Chuck 300mm Power Chuck,
• Electronics Hand Wheel Standard, Isolation Transformer For Both Drive,
• Spindle Speed 50-800 RPM, Spindle Taper MT-06, Repeatability 0.05 mm,
• Chuck Cylinder Open or Close Type,
• Hydraulic Power Pech Standard,
• Bed Type plano type,
• Main Motor 10 HP

Product Details:

TCP H-250

Product Description:

• Total Length Of Bed (Traveling Space) 1676mm (914mm),
• Of Center 254 mm, Width Of Bed 330.0 mm ,
• Spindle Bore 52 mm,
• Swing Over Bed 406.4 mm, Swing Over Cross Slide 228.6 mm, Swing Over Telescopic Cover 308 mm, Distance Between Centers 400 mm,
• X – Travel 203.2 mm, Z – Travel 300 mm, X/Z Feeding Rate 6/8 m/min,
• Controller System Siemens/Fanuc/Mitsubishi, Machine Operating System Siemens/Fanuc/Mitsubishi, X – Drive AC Servo Motor 4 NM, Z – Drive AC Servo Motor 4 NM,
• Axis X & Z Harden Bed Ways & Turcite, Turret Four Station / Tool Change,
• Spindle Drive V-Belt Pulley Drive, Coolant Water Cooled, Lubrication System Auto Lubrication Unit Chuck 250 mm Power Chuck,
• Electronics Hand Wheel Standard, Isolation Transformer For Both Drive, Spindle Speed 50-1000 RPM, Spindle Taper MT-06,
• Repeatability 0.05 mm,
• Cylinder Open or Close Type, Hydraulic Power Pech Standard, Bed Type Flat Cimoga Type,
• Main Motor 10 HP

Product Details:

TCP H-200

CNC Lathe Machine Total Length Of Bed 1371mm,Height Of Center 215mm,Width Of Bed 279mm,Spindle Bore 52mm,Swing Over Bed 355mm,Swing Over Cross slide 203mm,Distance Between Center 535mm,Swing Over Telescopic Cover 230mm,X-travel 177mm,Z-travel 200mm,X/Z Feeding Speed 6/8M/Min, Controller System Siemens/Fanuc/Mitsubishi, Machine Operating Panel Siemens /Fanuc/Mitsubishi, X-Drive Ac Servo Motor 4Nm,Z-Drive AC Servo Motor 4Nm,Axis X & Z Harden Bed Type Ways & Turcite, Turret Four Station/Tool Change, Spindle Drive V-belt Pulley Drive, coolant Water Cooled, Lubrication System Auto Lubrication Unit, Chuck 200mm Power Chuck, Electronics Hand Wheel Standard ,Isolation Transformer For Both Drive, Spindle Speed 50-1000RPM,Spindle Taper MT-06,Repeatability 0.05mm,Chuck Cylinder Open Or Close Type, Hydraulic Power Pech Standard, Bed Type Flat Cimoga Type, Main Motor 7.5Hp

Product Details:

TCP H-500

Product Description:

• Total Length Of Bed (Travelling Space) 2133mm (1371mm),
• Height Of Center 508 mm, Width Of Bed 609.6 mm ,
• Spindle Bore 80mm,
• Swing Over Bed 914.4 mm,
• Swing Over Cross Slide 609.6 mm,
• Swing Over Telescopic Cover 816 mm,
• Distance Between Centers 500 mm,
• X – Travel 432 mm,
• Z – Travel 738 mm,
• X/Z Feeding Rate 6/8 m/min,
• Controller System Siemens/Fanuc/Mitsubishi, Machine Operating System Siemens/Fanuc/Mitsubishi,
• X – Drive AC Servo Motor 7.7 Nm, Z – Drive AC Servo Motor 7.7 Nm, Axis X & Z Harden Bed Ways & Turcite, Turret Four Station / Tool Change,
• Spindle Drive V-Belt Pulley Drive,
• Coolant Water Cooled,
• Lubrication System Auto Lubrication Unit Chuck 400mm Power Chuck,
• Electronics Hand Wheel Standard, Isolation Transformer For Both Drive,
• Spindle Speed 50-700 RPM, Spindle Taper MT-06, Repeatability 0.05 mm,
• Chuck Cylinder Open or Close Type, Hydraulic Power Pech Standard,
• Bed Type plano type,
• Main Motor 20 HP

Product Details:

TCP H-600

Product Description:

• Total Length Of Bed (Travelling Space) 2133mm (1371mm)
• Height Of Center 609 mm
• Width Of Bed 750 mm ,Spindle Bore 100mm,
• Swing Over Bed 1125 mm, Swing Over Cross Slide 815 mm
• Swing Over Telescopic Cover 1018 mm
• Distance Between Centers 500 mm, X – Travel 545 mm, Z – Travel 725 mm, X/Z Feeding Rate 6/8 m/min, Controller System Siemens/Fanuc/Mitsubishi, Machine Operating System Siemens/Fanuc/Mitsubishi, X – Drive AC Servo Motor 7.7 Nm
• Z – Drive AC Servo Motor 10 Nm, Axis X & Z Harden Bed Ways & Turcite, Turret Four Station / Tool Change, Spindle Drive V-Belt Pulley Drive
• Coolant Water Cooled
• Lubrication System Auto Lubrication Unit Chuck 400mm Power Chuck, Electronics Hand Wheel Standard,
• Isolation Transformer For Both Drive, Spindle Speed 50-600 RPM
• Spindle Taper MT-06, Repeatability 0.05 mm,
• Chuck Cylinder Open or Close Type, Hydraulic Power Pech Standard, Bed Type plano type, Main Motor 25 HP

Product Details:

TCP H-600

Product Description:

• Total Length Of Bed (Travelling Space) 2133mm (1371mm),
  
• Height Of Center 609 mm, Width Of Bed 750 mm ,
• Spindle Bore 100mm, Swing Over Bed 1125 mm, Swing Over Cross Slide 815 mm,
  
• Swing Over Telescopic Cover 1018 mm,
  
• Distance Between Centers 500 mm,
  
• X – Travel 545 mm, Z – Travel 725 mm, X/Z Feeding Rate 6/8 m/min, Controller System Siemens/Fanuc/Mitsubishi, Machine Operating System Siemens/Fanuc/Mitsubishi,
  
• X – Drive AC Servo Motor 7.7 Nm, Z – Drive AC Servo Motor 10 Nm,
  
• Axis X & Z Harden Bed Ways & Turcite, Turret Four Station / Tool Change,
  
• Spindle Drive V-Belt Pulley Drive, Coolant Water Cooled, Lubrication System Auto Lubrication Unit Chuck 400mm Power Chuck,
  
• Electronics Hand Wheel Standard, Isolation Transformer For Both Drive,
  
• Spindle Speed 50-600 RPM, Spindle Taper MT-06,
  
• Repeatability 0.05 mm, Chuck Cylinder Open or Close Type,
  
• Hydraulic Power Pech Standard, Bed Type plano type,
  
• Main Motor 25 HP

Product Details: